Measuring Guide

Use these helpful tips to find your perfect fit. This guide requires using garments that fit you well as a point of reference.

  1. Neck

    Measure the circumference of your neck with at least one or two fingers of leeway, depending on preference. Round to the nearest half-inch.

  2. Sleeve Length

    Measure from the base of the neck at the center point, where your shirt collar meets the yoke, over the shoulder and straight out to your wrist.

    When using a shirt that fits well for reference: Begin at the center of the back of the shirt, where the collar meets the yoke, then run the measuring tape to the top armhole seam and straight down to the edge of the cuff.

  3. Chest

    The chest measurement is taken 1-inch below the armhole, not pit-to-pit. Measure around the body, under the arm at the broadest part of the chest for a full chest measurement.

  4. Waist — Tops

    Your natural waist is the narrowest part of your torso. Measure the circumference of your torso at your natural waistline.

  5. Waist — Bottoms

    For pants and trousers, measure the circumference around the body approximately 2-2.5 inches below the naval.

  6. Inseam

    Measure the inside leg from the crotch seam to the bottom of the pant leg.

Top figure
Not sure? Drop us a line. We’d be happy to assist.
Chat Now

Shirts

Our Slim Fit Shirt

  • Trimmer fit through shoulder, chest and bicep
  • More tapering in waist than classic fit

Shirts

Our Classic Fit Shirt

  • Easier fit through chest
  • Less tapering in waist
  • Wider shoulder
  • All-over easier fit in bicep, chest, shoulder
Slim shirts model

Casual and Sport Shirts

Size Fits Neck Fits Chest Shirt Waist Sleeve Length
S 14.5 – 15 34 – 36 37 34 31
M 15.5 – 16 36 – 40 38 1/2 34 31
L 16.5 – 17 40 – 44 42 35 32
XL 17.5 – 18 44 – 48 45.5 36 32.5

Business and Dress Shirts

Neck Size Fits Chest Shirt Waist Sleeve Length
15 36 - 38 37 34 33
15.5 38 – 40 38.5 34 33
16 40 – 42 41 35 33.5
16.5 42 – 44 42 35 34
17 44 – 46 44.5 36 34.5
17.5 46 – 48 45.5 37 34.5
Classic shirts model

Casual and Sport Shirts

Size Fits Neck Fits Chest Shirt Waist Sleeve Length
S 14.5 – 15 36 – 38 42 34 31
M 15.5 – 16 38 – 42 44 34 31
L 16.5 – 17 42 – 46 48 35 32
XL 17.5 – 18 46 – 50 52 36 32.5
XXL 18.5 50 - 52 54 37 32.5

Business and Dress Shirts

Neck Size Fits Chest Shirt Waist Sleeve Length
15 36 - 38 42 34 33
15.5 38 – 40 44 34 33
16 40 – 42 46 35 33.5
16.5 42 – 44 48 35 34
17 44 – 46 50 36 34.5
17.5 46 – 48 52 37 34.5
18 48 – 50 54 37 35

Blazers

Our Slim Fit blazers

  • Trimmer fit through shoulder, chest and bicep
  • More tapering in waist than classic fit

Shirts

Our Classic Fit Blazer

  • Easier fit through chest
  • Less tapering in waist
  • Wider shoulder
  • All-over easier fit in bicep, chest, shoulder
Slim blazers model

Slim Blazers

US 36 38 40 42 44 46
Euro 46 48 50 52 54 56
Fits Chest 36 38 40 42 44 46
Blazer Waist 38 1/2 40 41 1/2 43 1/4 44 3/4 46 3/4
Sleeve Length 33 1/2 34 34 3/4 35 1/4 36 36 1/2
Body Length 29 29 1/4 29 3/4 30 30 1/2 31
Classic blazers model

Classic Fit Blazer

US 36 38 40 42 44 46
Euro 46 48 50 52 54 56
Fits Chest 36 38 40 42 44 46
Blazer Waist 39 1/2 41 42 1/2 44 1/4 45 3/4 47 3/4
Sleeve Length 33 1/2 34 34 3/4 35 1/4 36 36 1/2
Body Length 29 1/2 29 3/4 30 1/4 30 1/2 31 31 1/2

Pants

Our Franklin Pant

  • Slim fit 5-pocket pant with zip fly
  • Trim through hip, thigh and leg
  • 33-inch inseam
  • Mid-rise

Pants

Our Richmond Fit Pant

  • Classic flat front pant with zip fly
  • Slightly tailored fit through hip, thigh and leg
  • 33-inch inseam
  • Sits just below the waist

Pants

Our Patterson Fit Pant

  • Classic flat front pant with zip fly
  • Fuller fit through hip, thigh and leg
  • 33-inch inseam
  • Higher rise in front and back for a roomier fit through waist

Pants

Our Downing Fit Pant

  • Classic flat front trouser with zip fly and tab waistband
  • Slightly tailored fit through hip, thigh and leg
  • 33-inch inseam
  • Fits similar to the Richmond pant with a cleaner feel
Franklin model
Franklin Fit
30 31 32 33 34 36 38 40
Waist 32 1/2 33 34 34 3/4 36 37 3/4 39 3/4 41 3/4
Leg Opening 13 3/4 14 14 1/4 14 1/2 14 3/4 15 15 1/2 15 3/4
Front Rise
including waistband
9 5/8 9 3/4 9 7/8 10 10 1/8 10 3/8 10 3/4 11
Inseam 33 33 33 33 33 33 33 33
Richmond model

Richmond Fit

30 31 32 33 34 36 38 40
Waist 32 1/2 33 34 34 3/4 36 37 3/4 39 3/4 41 3/4
Leg Opening 14 1/2 14 3/4 15 15 1/4 15 1/2 15 3/4 16 16 1/4
Front Rise
including waistband
9 3/4 9 7/8 10 10 1/8 10 3/8 10 5/8 10 7/8 11 1/8
Inseam 33 33 33 33 33 33 33 33
Patterson model

Patterson Fit

30 31 32 33 34 36 38 40
Waist 33 33 1/2 34 1/4 35 36 1/4 38 1/4 40 1/4 42 1/4
Leg Opening 15 1/2 15 1/2 16 16 1/4 16 1/4 16 1/2 17 17 1/2
Front Rise
including waistband
10 1/4 10 1/4 10 1/2 10 1/2 10 3/4 11 11 1/4 11 1/2
Inseam 33 33 33 33 33 33 33 33
Downing model

Downing Fit

30 31 32 33 34 36 38 40
Waist 32 1/2 33 34 34 3/4 36 37 3/4 39 3/4 41 3/4
Leg Opening 14 1/2 14 3/4 15 15 1/4 15 1/2 15 3/4 16 16 1/4
Front Rise
including waistband
9 3/4 9 7/8 10 10 1/8 10 3/8 10 5/8 10 7/8 11 1/8
Inseam 37.5 unhemmed

Sweaters

Our Sweater Fit

  • Sweater fit is primarily determined by chest measurement, shown in the chart below
    * Due to the nature of knit sweaters, fits vary slightly by style. Please reference information on product pages when determining sweater fit.
Sweaters model

Sweaters

size fits chest
S 34-36
M 36-40
L 40-44
XL 44-48
XXL 48-50

Polos

  • Slim fit throughout bicep, chest and shoulder
Polos model

Polos

size fits neck fits chest
S 14.5-15 34-36
M 15.5-16 36-40
L 16.5-17 40-44
XL 17.5-18 44-48
XXL 18.5 48-50

Question / Concerns

Having issues getting your correct measurements? Drop us a line! We’re here to help.

Chat Now